Get matched with top woodworkers in Glencoe, KY

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: Why consider hiring a professional for deck or porch repairs?

• <div><p>Professionals ensure safe, thorough repairs using quality materials, extending the life of your structure.</p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: What should I consider when hiring a carpenter?

• <div><p>Before hiring a carpenter, the most important thing is to make sure they are properly qualified and insured for the job. It&rsquo;s more than reasonable to ask your prospective carpenter for customer references, as well as about their licensing and insurance. You should also consider choosing a carpenter that specializes in your specific project area to ensure high-quality results. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Glencoe, KY?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Glencoe, KY

*The Angi rating for Woodworking companies in Glencoe, KY is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Glencoe, KY is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on November 07, 2025

Reviewed in November 2025
Great work. I would definitely reccomend if you need a tree(s) cut down. Excellent job done.
Florer Family Tree Service
Request a quote
Reviewed in November 2025
Adam showed up to look at the job right on time. I had 3 very large tall trees that needed to fall he looked very confident that it would not be a problem. We estimated the tree were close to 100 ft tall.Gave me a reasonable price. Set a date. He showed up right on time him and his brother got...
Pro Tree & Landscape Services
Request a quote
Reviewed in September 2025
Wolfe excavation LLC did an amazing job of transforming my house into a home again after long hours of regrading our yard. He finished off with seating and strolling, and the grass is already growing back and looks amazing. Highly highly recommend!
Wolfe Excavation LLC
Request a quote
Reviewed in May 2024
Matt Hughes and Matt woody were very professional workers and great at their craft and finished in a timely manner.
West Shore Home Lexington
Request a quote
Reviewed in October 2023
Mike is the BEST!! I have hired him many times over the the last 5 years and have trusted him with many jobs, which always turn out perfectly. From chair rails in my bathroom and dining room, to window trim throughout my house, to cabinet door hanging, and even building a custom hall tree from...
Delco Construction
Request a quote
Reviewed in October 2023
The work was done when it was suppose to be done. Excellent work. My barn and building are better than new. And they clean after themselves. So very glad i found this company. I have now contracted this company to replace my entire wooden horse fencing on all my pastures.
Morning Wood Lumber LLC
Request a quote
Reviewed in October 2023
We transformed our living room into a home office. The Archway to this room was smaller than the standard French door fit. He cut down the door sizes for a custom fit they look beautiful. He hung them stain. Them leveled them turned out just as I had hoped. He’s also done chair rail and woodwork...
Cuda Construction LLC
Request a quote
Reviewed in August 2023
I hired Midder Bees to do some furniture assembly. The owner, Brandon was prompt, pleasant and efficient. I was very satisfied with his work. I've been looking for a good handyman. And was so glad I came across his services!
Midder Bee's Handyman LLC
Request a quote
Reviewed in February 2023
Y&Y Custom Hardwood did a phenomenal job removing and installing white oak to match our existing white oak. Canâ t recommend them enough! Excellent work, precise, on-time, great follow-up..they do what they say. Spectacular craftsmanship.
Y&Y Custom Hardwood
Request a quote
Reviewed in August 2022
Chuck did an excellent job designing, building, installing, and finishing a set of built-ins in our living room. He was knowledgeable, courteous, and timely I would highly recommend using him for further carpentry work in the future.
Seven Hands
Request a quote

Find Woodworkers in Glencoe

Custom Woodworking Group

3.8(

)

Custom Cabinets - BuildFurniture - Build Custom

Serving Glencoe, KY and surrounding areas

Approved

In business since 1991

Free estimates

Credit card accepted

"Did an amazing job repairing our couch and chair. The quality of their repair is better than what we walked out of the store with at the time of purchase. 5 stars. We will be using their services again!!"

+41

Response time6 days

Recommended by100%of homeowners

Custom Cabinets - Build

Serving Glencoe, KY and surrounding areas

Approved

In business since 2025

Free estimates

Warranties offered

"Stone Oasis did a fantastic job on my countertops. Justin, the owner, was extremely helpful from the moment I walked in. He always followed up during the following weeks to see when my cabinets would be done. He went the extra mile to make sure my new sink matched perfectly. Installation was scheduled just days after measuring, not weeks like the big box stores. The photos below are from the day of installation so the kitchen is not fully finished but so far it looks amazing!!"

Response time3 days

Response rate100%

11 neighbors recently requested a quote

Serving Glencoe, KY and surrounding areas

Approved

Super Service Award Winner

In business since 2016

Free estimates

Customers say: Quick response

"I am so happy I chose Wilson Construction. I needed a repair of our side porch steps. He came out immediately to give me a quote. The quote was very reasonable and we ended up getting the entire side porch replaced ( it was much needed). It was replaced in one day less than a week after we called. Job well done. I highly recommend, you won’t regret it."

Response time6 hrs

Response rate95%

Recommended by14%of homeowners

Request Quote

Stephens Home Improvements, LLC

5.0(

)

Carpentry Framing - Install

Serving Glencoe, KY and surrounding areas

Approved

Customers say: Quick response

"Stephens Home Improvements did a fantastic job on my deck! The job was done at a great price and the quality of the work is fantastic! Super professional!"

Recommended by100%of homeowners

Request Quote

J.C. Rejuvenate Construction & Remodeling

4.9(

)

Carpentry Framing - InstallCloset - BuildGazebo or Freestanding Porch - Repair+4 more

Serving Glencoe, KY and surrounding areas

Approved

In business since 2000

Free estimates

Warranties offered

"Was very knowledgeable about multiple areas. Great prices and workmanship"

Response time2 hrs

Response rate92%

Recommended by100%of homeowners

Request Quote

Complete Structural Installation

Serving Glencoe, KY and surrounding areas

Approved

In business since 2001

Free estimates

Warranties offered

"Respectful of property, cleaned up after job completed, completed job when estimated."

Response time2 days

Recommended by88%of homeowners

Closet - BuildInterior Trim and Decorative Moldings - Install

Serving Glencoe, KY and surrounding areas

Approved

In business since 1996

Credit card accepted

Customers say: Quick response

"Jason and his crew did an outstanding job on our room addition (sunroom). People we know commented on Jason's excellent craftsmanship. In addition, Jason was always open to our feedback and displayed excellent customer service. We are very happy with the finished work and we would highly recommend Moreland Homes!"

Response time3 hrs

3 neighbors recently requested a quote

Recommended by83%of homeowners

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+7 more

Serving Glencoe, KY and surrounding areas

Approved

Free estimates

Emergency services offered

Small jobs welcome

"Amazing work and even better guy, this guys a stud all around and knows what he is doing."

Arbor, Pergola or Trellis - Build Custom

Serving Glencoe, KY and surrounding areas

Approved

In business since 2024

Free estimates

Credit card accepted

"Good communications with Brian who did a great job repairing our front yard after we had some work done to repair a water line leak. Job was done well under the estimates had I received from other landscapers."

Response time4 days

15 neighbors recently requested a quote

Carpentry Framing - InstallCustom Cabinets - Build

Serving Glencoe, KY and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

23 neighbors recently requested a quote

Request Quote

...

Showing 1-10 of 134

Woodworking questions, answered by experts

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

Professionals ensure safe, thorough repairs using quality materials, extending the life of your structure.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Before hiring a carpenter, the most important thing is to make sure they are properly qualified and insured for the job. It’s more than reasonable to ask your prospective carpenter for customer references, as well as about their licensing and insurance. You should also consider choosing a carpenter that specializes in your specific project area to ensure high-quality results.

The Glencoe, KY homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.