Best deck repair pros near Almo, KY

When installing deck boards, screws are generally a better option than nails. Screws offer superior holding strength over time, keeping the boards securely in place. In contrast, nails are more likely to pop out, which can create a tripping hazard. While you can use either, we recommend using 3-inch galvanized deck screws. To minimize the risk of cracking the wood, it's a good practice to drill small pilot holes before driving the screws into the deck joists.

As with patios, there are many types of deck choices to choose from to add personalization to your home. Some common deck options include:

• Attached decks are anchored to the home and include simple ground-level options or multi-level structures with stairways and separate landings. 

• Detached island decks are not attached to the home; they’re a freestanding structure in the yard. 

• Wraparound decks connect the back of the house with at least one other side and often are built with railings for safety. 

• Multi-level decks connect your deck through varying levels of elevation, featuring landings that are attached to stairs.

Yes, you can draw your own deck plans in many cases. However, you must know your local building codes and be familiar with carpentry principles. Even then, it's always best to run your plans by a professional contractor with experience building decks, whether you choose to DIY some of the build or not.

Deck stairs should have at least three stringers rather than two. The recommended minimum width for stairs is 36 inches, and the International Association of Certified Home Inspectors recommends at least three cut stringers to provide sufficient support on wood decking stairs of this width. Generally, stringers should be a maximum of 16 inches apart for wood decking and 12 inches apart for more flexible composite decking.