Get matched with top fountain pros in Kingman, KS

Yes, natural pools can get algae since they use the same filtration processes as lakes or streams. However, you can reduce the risk of algae by adding more algae-fighting plants and not installing your natural swimming pool in direct sunlight, as it promotes algae growth.

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

When deciding whether or not to turn off your pump, you should consider your area’s climate and the aquatic life in your pond. If you live in an area with freezing winter temperatures and don’t have any wildlife, keeping your pump on could damage it. If you have aquatic life but live in a colder climate, you might consider keeping your pump running and adding a pond heater.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.