Best dryer vent cleaners near Dunlap, IL

If you happen to disassemble your dryer vent and feel the inside of the duct immediately after drying a load of laundry, it will likely feel damp and warm. That’s normal, as the vent has just finished moving the humidity and moisture from your laundry to the exterior of your property. However, if your dryer vent has water droplets in it at any time, it’s a sign that there’s trouble with the machine’s ventilation. You should call in a professional right away to get the issue fixed.

While a professional can always help, there are some common plumbing culprits you can check yourself to see if you can find the sewer gas smell. For example, you should check your water traps, sometimes called P-traps and S-traps, which are located under sink, shower, and laundry drains. The wax ring beneath the base of your toilet, which creates a watertight seal with the plumbing, could also have gone bad.

Signs that your dryer is about to catch fire include a burning smell or the dryer and the clothes getting hotter than usual. If this happens, turn the dryer off immediately and call a repair professional. Another less urgent sign is that your clothes are taking longer to dry than normal. If this is the case, check the lint trap, vent, and duct to make sure they are all clean. If they are, you may need to call a pro to find the source of the issue.

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well.