Get matched with top gas log pros in Emmetsburg, IA

The cost to repair a gas leak is $120 to $250 on average, but it could be as costly as $5,000, depending on the leak location and severity. 

For example, if you have drywall covering the source of the leak, you'll need to hire a contractor to replace the removed drywall. In addition, if the leak is underground, you'll need a contractor to excavate the ground to reach the gas line. 

No, fixing or patching a hole in a gas line may not seal it completely. A patch should be a temporary solution because the damaged area will be weaker than the rest of the pipe, increasing the likelihood of future leaks. Therefore, if a gas line incurs damage, call a licensed plumber and have it replaced right away.

Modern gas fireplaces are relatively efficient and don't burn excessive amounts of gas, especially compared to older models. A gas fireplace might use between 10,000 to 40,000 BTUs per hour; the total amount of gas used depends on the fireplace's size, heat output, and how often it's in use. To help keep your running costs down, consider using a thermostat and turning off the fireplace when not needed to minimize gas consumption

Only yellow Teflon tape is approved for use on gas lines. Also called yellow PTFE tape, it is thicker and specifically rated for use on natural gas and propane connections. Standard white Teflon tape is not safe for gas applications. If you have questions about sealing gas line connections, contact a pro like a gas line contractor or plumber who installs or runs gas lines.