Get matched with top pressure washers in Nashville, AR

You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.

The white nozzle is your best choice for power washing indoors. The white nozzle, or the 40-degree nozzle, comes with a pressure even lower than the standard green nozzle but still has enough force to clean the surface. It works great for painted and wooden surfaces. It also doesn’t damage more delicate materials like ceramic or tiles. However, avoid pressure washing delicate furniture, caulking, and other surfaces that require more tendered touches than regular surfaces.

It is possible to clean gutters with a pressure washer but work with a maximum psi of 1,800 to minimize the risk of damaging your eavestrough. And, instead of climbing a ladder, it’s safer to use gutter elbow extensions. These avoid the risk of the machine’s pressure causing you to lose stability while up high.

You don’t have to pressure wash your deck before painting. However, you must clean the deck, and pressure washing is one of the most efficient methods. Pressure washing quickly removes flaked paint, wood fibers, and embedded dirt. It also gets much deeper into the wood surface than manually scrubbing the deck—and the cleaner the deck, the better the paint can adhere. Ensure the wood is fully dry before applying paint.