Get matched with top sonic cleaning pros in Decatur, AR

While it’s not completely necessary for them to operate properly, as the occasional rainfall can rinse away dirt and debris, manually cleaning solar panels from time to time can keep them operating more efficiently.

Dirt, debris, pollen, and bird droppings can collect on the surface of the panels. Depending on the amount of solar panels you have, this can add up over time, so set a regular maintenance schedule. Moreover, if you live in a climate with little to no rainfall, more debris can accumulate, causing inefficiencies that would be clear in your electricity bill. 

Generally, snow removal from a roof should occur once over six inches of snow accumulates, especially if you notice that ice dams have formed. Without ice dams, you can let the snow accumulation hit 12 inches before removing it. However, the amount of snow that is too much for your roof also depends on the sturdiness of your roof and the compactness of the snow. If your roof needs maintenance or has structural issues, it’s best not to let the snow accumulate too much for fear of collapsing.

Walking on the roof to clean gutters is unsafe and not recommended due to significant safety risks. It is especially dangerous on steep or slippery roofs, or if the roof is wet or covered in leaves, which increases the chance of a fall. In addition to personal injury, walking on the roof can damage shingles, potentially leading to water leaks. Instead of walking on the roof, use a sturdy ladder positioned on a stable surface to access the gutters. Be aware that using a ladder also carries risks, as it can be difficult to maintain balance while performing the work. You can also use ground-based cleaning tools. For safety reasons and to prevent damage to your roof, hiring a professional to clean your gutters is the best and safest option.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.