How Much Does Landscape Lighting Repair Cost? [2026 Data]

This article was created using automation technology and thoroughly fact-checked and edited by an Angi Editor in accordance with our AI policy.

In 2026, the national average cost for landscape lighting repair is $250. Most homeowners spend between $120 and $400, depending on the repair type, fixture complexity, and whether the job involves wiring, a transformer, or individual fixture work.

Landscape Lighting Repair Cost Factors: What Affects the Price?

Several factors shape your landscape lighting repair cost, from the type of repair and system size to materials, brand, and your location. Understanding each variable helps you build a realistic budget before work begins.

Type of Repair

Landscape lighting repairs range widely in cost and complexity, from routine bulb swaps at $20 to $75 per unit to major transformer or wiring work reaching $400 to $500 or more. Catching problems early, such as flickering lights or non-working zones, helps you address issues before they escalate into more expensive repairs. Costs vary by repair type, as the table below shows.

Fixture Replacement

Fixture replacement costs $75 to $250 per fixture, depending on material and complexity, and is necessary when a light is broken, corroded, or no longer functioning safely. Path lights and spotlights are especially vulnerable to damage from weather exposure and landscaping equipment, so homeowners often find themselves replacing fixtures every few years.

Wiring Repair

Wiring repairs typically cost $120 for minor fixes and can reach $400 or more for extensive rewiring, and they are most urgent because damaged wires can cause safety hazards or complete system failure. Rodent damage, moisture corrosion, and accidental cuts during yard work are the most common causes, particularly in older systems or those installed without protective conduit.

Transformer Repair or Replacement

Transformer repair or replacement costs $150 to $500 and is one of the most critical repairs you can make, since the transformer converts household voltage to a safe level and powers your entire system. All lights going out at once or persistent flickering are the clearest signs of failure, and most transformers last eight to 15 years before needing attention.

Bulb or Socket Replacement

Bulb and socket replacement is the most routine landscape lighting repair, costing $20 to $75 per fixture for standard components. Halogen bulbs fail more frequently than LEDs, so systems using older halogen technology tend to need more frequent service, and specialty bulbs such as color-changing or smart-enabled options can push costs higher.

Timer or Control System Repair

Timer and control system repairs typically cost $60 to $200 and are less frequent than other landscape lighting fixes. These components automate scheduled or remote operation, so a malfunctioning timer or programming error can disrupt your entire lighting routine and reduce energy efficiency.

Water Damage Remediation

Water damage remediation costs start at $100 for minor issues and can reach $450 or more when extensive corrosion or fixture replacement is involved, making it one of the more urgent repairs for both safety and system longevity. Non-functioning lights, tripped breakers, or visible rust are the clearest warning signs that water has intruded into your system.

Type of Landscape Lighting System

The type of landscape lighting system you have is a key driver of repair costs, with low-voltage systems being less expensive to service than line-voltage systems, which require a licensed electrician. LED systems are more durable and need fewer repairs than halogen systems, and modular systems with interchangeable parts are generally cheaper to fix than integrated systems with built-in fixtures. Costs vary by system type, as the table below shows.

Brand

The brand of your landscape lighting system affects repair costs primarily through parts availability and pricing. Brands that use proprietary components, including well-known names like Kichler, Volt, and FX Luminaire, tend to carry higher part prices, though their quality and warranty coverage can reduce the frequency and total cost of future repairs. Budget brands may cost less to repair initially but often require more frequent service over time.

Size

The size of your landscape lighting system directly influences repair costs, since larger systems with more fixtures, additional zones, or longer wire runs require more labor and materials. Costs vary by system size, as the table below shows.

Materials

The materials used in your fixtures and components affect both how often repairs are needed and how much they cost. Brass, copper, and stainless steel resist corrosion and last longer but carry higher repair and replacement costs, while plastic and aluminum are more affordable to fix yet tend to need more frequent attention due to weathering and breakage. Costs vary by material type, as the table below shows.

Warranties

Manufacturer and installer warranties can significantly offset landscape lighting repair costs by covering parts for a set period, with some policies also including labor. Always review your documentation or contact your installer before scheduling service, since many warranties require the use of authorized technicians to remain valid.

Maintenance Plans

Professional maintenance plans typically cost $100 to $300 per year and include annual inspections, fixture cleaning, bulb replacement, and minor adjustments that help prevent major repairs and extend your system's life. Whether a plan makes financial sense depends on your system's age and complexity, but for older or larger installations, the upfront cost often offsets more expensive as-needed repairs down the line.

Labor

Labor for landscape lighting repair runs $50 to $120 per hour, with minimum service fees of $75 to $150 per visit, depending on who you hire, whether that is an electrician, a landscape lighting specialist, or a general handyperson. Emergency or after-hours calls raise the price, and complex jobs such as rewiring or transformer replacement require specialized expertise that commands higher rates.

Location

Your geographic region and the specific location of the repair on your property both affect the total cost of landscape lighting service. Urban areas carry higher labor rates, rural locations may add travel charges, and hard-to-reach spots such as steep terrain or buried wires increase the time a technician spends on site. Some areas also require permits for electrical work, so check local codes before scheduling repairs.

Additional Repairs or Services

Repair visits often uncover opportunities for additional work that can increase your total cost, including adding new fixtures for $120 to $300 or upgrading to smart controls for $150 to $400. Pros frequently recommend these add-ons to address underlying issues or improve overall system efficiency while they are already on site.

Landscape Lighting Repair vs. Replacement

Deciding whether to repair or replace your landscape lighting depends on several factors. If your system is relatively new, the damage is minor, or the repair is covered by warranty, repair is the smart choice. However, if your system is old, requires frequent repairs, or the cost of repair exceeds 50% of the cost of a full replacement , consider upgrading.

Newer systems offer improved energy efficiency, lower maintenance needs, and smart features. For example, repairing a single fixture or a minor wiring issue might cost between $120 and $200. Replacing an entire aging system, especially with modern LED or smart lighting, may cost $1,500 to $4,000 or more, but it brings long-term savings and reliability. Investing in a new lighting system can also add value and enhance the home's curb appeal.

Tips to Reduce Landscape Lighting Repair Costs

Here are a few ways to keep landscape lighting repair costs within budget:

• Schedule regular maintenance to prevent major issues.

• Replace bulbs and clean fixtures yourself when safe.

• Get multiple quotes from qualified professionals.

• Use durable, weather-resistant materials for longer-lasting repairs.

• Check warranty coverage before paying out of pocket.

• Combine multiple repairs into a single service call to save on labor costs.

• Consider upgrading to LED or smart controls for long-term savings.

Why You Should Hire a Landscape Lighting Repair Pro

DIY repairs can save you money on labor, but there are important considerations. You’ll need basic hand tools, electrical testers, and replacement parts, which can cost between $30 and $100 upfront. 

More complex repairs—such as major wiring, transformer issues, or troubleshooting a non-functional system—are best left to professionals to avoid safety hazards or further damage. For complex jobs, expect a local outdoor lighting pro to charge $150 to $500 or more, but you gain peace of mind and lasting results.

Here’s why it’s ideal to hire a landscape lighting repair pro

Even if landscape lighting repairs seem simple, they often require specialized tools and expertise. Here’s why it’s best to leave the job to an experienced pro:

• Professionals know how to diagnose, troubleshoot, and repair complex lighting systems.

• Working with a pro ensures compliance with local codes and regulations.

• DIY mistakes can lead to short circuits, blown fuses, and further lighting damage.

• Reputable pros carry insurance and offer warranties for further protection.

• Pros complete repairs safely and efficiently, saving you time, energy, and stress.

If you want to DIY landscape lighting repair

If you want to assist your pro with the process, consider taking on the following tasks:

• Remove trees, shrubs, or other obstacles near your lighting.

• Help collect debris, organize tools, and keep the work area clean.

• Plant flowers, level the soil, and arrange garden beds to boost curb appeal once the job is complete.

• Handle minor painting or staining jobs for nearby fences or surfaces.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.