How Much Does a Patio Cost to Install in Orlando? [2026 Data]

Patio service costs depend on your project and location. Check with a local pro for your specific job.

Get quotes from patio pros near you
No obligation · 100% free
Get quotes from patio pros near you
No obligation · 100% free
Cost Insights
  • A concrete patio in Orlando costs $9 to $20 per square foot to install. 

  • A raised patio costs $10 to $25 per square foot more than a ground-level patio.

  • A basic screen enclosure over a patio runs $5,000 to $15,000.

  • Contractors charge $70 to $100 per hour for skilled specialty work.

  • Orlando homeowners may recoup 50% to 75% of patio project costs at resale.

With around 230 sunny days per year, patios are highly valued in Central Florida. Installing a new patio in Orlando costs $2,983 on average, with most homeowners spending anywhere from $1,712 to $4,317 based on size, material, and site conditions. The local market's premium for screened enclosures and pool-adjacent installations frequently drives up total project costs. Here's a complete breakdown of what drives patio costs in Orlando, Florida.

Patio Cost Factors 

The city's sandy soils, subtropical weather, and pool culture all shape the total cost of a patio installation in Orlando, Florida. Understanding these local cost drivers helps you build a realistic budget before you start collecting bids.

Size

Patio installation costs $9 per square foot for a basic broom-finished concrete slab on a flat, accessible lot and up to $50 per square foot for a premium travertine installation with pool integration. Naturally, the bigger the patio, the more it will cost. A small 7-foot-by-7-foot bistro patio will almost always cost significantly less than a large dining patio made from the same material. 

Exploring how patio size affects both cost and livability is a useful exercise before finalizing your design, particularly in a market where the patio often functions as a genuine daily living room for eight or more months of the year.

Here’s how patio size influences the average installation cost:

Patio SizeSquare FootageAverage Cost
Small49$400–$2,500
Medium144$750–$7,200
Large400+$2,000–$20,000

Materials

Depending on the material, you can build a patio for as low as $1 per square foot or as high as $50 per square foot (or more). Concrete is the most widely installed material in Orlando. Broom and exposed aggregate finishes are favored in Florida for their slip resistance in wet conditions. 

For homeowners evaluating natural stone options, flagstone patio costs vary by installation complexity, often ranging between $25 and $50 per square foot for the premium stone. Gravel runs $1 to $4 per square foot and is occasionally used in drainage-focused planting areas, but is less common as a primary patio surface in the Florida market.

Take a look at how patio material affects the installation cost:

MaterialAverage Lifespan (Years)Average Cost per Sq. Ft.
Brick pavers25–35$15–$19
Concrete30–50$9–$20
Gravel50+$1–$4
Concrete pavers25–35$14–$17
Travertine40–50$25–$50

Demolition

Budget between $2 and $5 per square foot for demolition of an existing concrete patio in Orlando, on top of your new installation costs. Consider hiring a local concrete removal professional if you’re replacing old slabs that have seen better days. You’ll likely save money by asking your contractor to include this work in the new patio installation.

In Central Florida, concrete patio failure is most commonly driven by tree root intrusion and poor initial drainage design. Concentrated root growth from the area's abundant oak, magnolia, and palm canopies can lift and crack slabs quickly.

Site Prep

Orlando's sandy soils are generally well-drained and relatively stable, which is one reason paver patios perform so well here. However, site preparation is still a meaningful cost factor, particularly on lots with significant root systems, grade changes, or poor surface drainage. 

Skipping proper site preparation can lead to paver settlement, surface cracking, and drainage pooling that can create mosquito breeding habitat. Pooling water on the surface of your new patio can also lead to costly water damage, shortening your patio’s lifespan. Budget $500 to $1,500 for standard site preparation on a flat, accessible Orlando lot, with costs rising significantly on sites with root intrusion, difficult access, or grade correction needs.

Shape

Custom patio shapes cost more than standard rectangular layouts. They require more work and often specialized materials. Curved, pool-adjacent, and multi-zone designs are essentially the market standard for mid-to-upper tier homes across Central Florida. 

Before finalizing a layout, explore a range of paver patio ideas that work well in Orlando's tropical setting. Pavers are a great option for curved or circular patios because you can arrange them without much customization.

Ground Level vs. Elevated

Ground-level patios are the standard and most cost-effective choice for virtually all residential lots in Orlando. Where they do occur, elevated or structural patio installations cost $10 to $25 per square foot more than a ground-level patio of the same material. 

Weigh the practical cost and functional differences between lanais and patios before committing to a design. Though ground patios are the most popular option, a raised patio is a great solution if you want your patio to be level with your door or if your house is built on a slope.

Heat and Humidity

Orlando's subtropical climate means summer highs regularly exceed 90°F, afternoon thunderstorms occur daily throughout the six-month rainy season, and mosquito and no-see-um pressure is significant during the warm months. In many Orlando neighborhoods, especially mid-range and higher-end homes, a screened lanai is considered standard. 

A basic aluminum-framed screen enclosure over an existing patio in Orlando runs $5,000 to $15,000. A more substantial patio enclosure with insulated roof panels, glass walls, or hybrid screen-and-glass construction runs $8,000 to $25,000 or more.

Sandy Soils

Orlando's sandy, well-drained soils are a meaningful advantage for paver patio installations. Pavers perform exceptionally well on stable, well-drained sandy surfaces. This is one reason that pavers are more dominant as the premium patio material in the Orlando market than in markets where soil expansion and freeze-thaw create additional engineering requirements. 

Even so, the well-drained soil environment requires specific attention to proper compaction and edge restraint installation. Underprepared sandy bases can allow paver migration over time, particularly in areas subject to heavy foot traffic or equipment loads.

Patio Pro Costs

Labor accounts for 40% to 60% of the total cost of a concrete or paver patio installation in Orlando. Labor rates for experienced Orlando patio contractors track at or slightly below the national average, consistent with the city's below-average cost-of-living profile. 

Labor

Patio contractors in Orlando charge $4 to $9 per square foot for installation labor on standard concrete and paver work, with travertine and natural stone installations running higher. On an hourly basis, experienced contractors charge $45 to $70 per hour for standard work and $70 to $100 per hour for skilled specialty work, like pool deck integration and complex enclosure framing. 

A contractor who knows how to seal patio pavers effectively to protect against Orlando's specific combination of UV intensity, standing water, and tropical moisture is worth seeking out. Proper sealing extends the life and appearance of any paver or stone surface significantly under Florida's demanding conditions, and not all contractors approach this with the same level of care.

Additional Pros to Consider Hiring

If your patio project involves outdoor electrical, gas, or plumbing work, you'll need to hire specialized trades beyond a standard concrete contractor. Screen enclosure contractors in Orlando may specialize exclusively in aluminum framing and screening systems, a distinct trade from general patio contractors.

Permits

At-grade patios and pavers often do not require a building permit in Orlando, but may require zoning review or approval, particularly if impervious surface limits or easements are affected. Patio covers, screen enclosures, pergolas, and any structural addition to the home require a full building permit through Orange County's Fast Track Online Services portal or through the City of Orlando's permitting system, depending on your municipality. 

Building permit fees are based on project valuation. All permitted work must be performed by a licensed contractor, and a licensed contractor must accept permit issuance. 

Property Taxes

If you’re installing a concrete patio or using another material that your municipality deems a “permanent foundation,” consider the impact it will have on your property taxes. The total increase in taxes isn’t going to be enormous, but plan on spending a bit more over time on any patio that bumps up your taxes.

Does a Patio Increase Home Value?

In the Orlando real estate market, outdoor living space is a buyer expectation. How much a concrete patio increases home value depends on the quality of the installation and the patio's condition upon listing. Professionally installed patios in Orlando can yield a return on investment (ROI) of 50% to 75% at resale, with higher returns possible for screened enclosures, premium paver surfaces, and pool-adjacent outdoor rooms.

A patio designed for summer usability, featuring adequate shade and an insect-resistant design, signals to buyers that the outdoor space is a genuine year-round room. A patio built with quality travertine or premium pavers that have held up well under Florida's UV and heat photographs beautifully and communicates design investment.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to patio services

From average costs to expert advice, get all the answers you need to get your job done.