
The EPA banned R-22 refrigerant, but if you still have a system that runs on it, here’s the latest on R-22 refrigerant prices for the remaining reserve.
Furnace repair costs in Tampa, FL, are $767 on average. The final cost depends on the furnace type, which part needs repair, and labor rates in your area, so the final price will range from $165 to $1,368. Reach out to a local HVAC pro for an accurate estimate.
The type of furnace you have and the specific part that needs repair or replacement are the most important cost factors to consider.
The homes in Tampa that have furnaces most often have electric furnaces, which are more affordable to repair than those that use gas, propane, or oil.
The above-average cost of living in Tampa means a higher labor cost than you’d see in most other cities.
Routine furnace maintenance is especially important in Tampa since most homeowners call for heat infrequently, and maintenance can help keep your dormant system in good health.
Furnace repair costs in Tampa average $767, and most projects total between $165 and $1,368. The price you’ll pay will depend mostly on the type of furnace you have and the material and labor costs involved in replacing the damaged component. Many homeowners in Tampa focus more on AC upkeep, so you may want to pay extra for a tuneup while you’re repairing your furnace to keep it in good shape.
Furnace repair in Tampa, FL, can cost anywhere from $49 to $4,900, depending mostly on the specific issue you’re having and the type of furnace in your home.
Regardless of their fuel source, furnaces are complex appliances that have a lot of moving parts. Some of those parts significantly influence furnace repair costs, while others are simpler and less costly to repair.
Here is the average furnace repair cost based on the part:
Furnace Part | Average Cost |
---|---|
Burners | $360–$1,100 |
Blower motor | $360–$4,900 |
Circuit board | $480–$1,500 |
Coils | $1,400–$4,900 |
Combustion chambers | $240–$1,500 |
Draft inducer motor | $480–$3,700 |
Flame sensor | $360–$600 |
Flue pipe | $900–$1,900 |
Furnace filter | $50–$150 |
Gas valve | $480–$1,500 |
Heat exchanger | $200–$3,600 |
Ignitor | $360–$1,200 |
Relay switch | $360–$700 |
Thermostat | $240–$1,500 |
Transformer | $240–$500 |
Note that electric furnaces, which are the most common type in Tampa (where very mild winters demand minimal heat), don’t have many of these components. It’s rare that homeowners in Tampa will need to pay for burners, combustion chambers, flame sensors, flue pipes, gas valves, or ignitors.
A furnace requires regular maintenance in order to operate efficiently. Otherwise, dust and other debris can clog burners, the pilot light, and other parts, causing more wear and tear on the system.
A furnace inspection costs $80 to $100 on average, and you need to schedule an inspection at least once per year to keep your system running smoothly. An advanced inspection, which includes cleaning and a tuneup, costs $125 to $200.
Additional maintenance costs include filters and air duct cleanings. You need to replace the filters once every 90 days, which will cost $4 to $140 per year. Schedule duct cleanings every three to five years, and expect to spend $275 to $500 for the cost of cleaning air ducts.
Routine maintenance is always helpful for keeping your HVAC equipment running smoothly, but it’s especially important in Tampa, where homeowners sometimes go the entire year without turning on the heat. A furnace that sits unused won’t have moving parts wearing down, but dust buildup and degradation of unused electrical components in the humidity can contribute to problems. For the rare gas furnaces in Tampa, non-use can lead to clogged ignitors and related issues, which means routine maintenance is a must.
HVACs are one of the most complicated and essential systems in our homes. To avoid further damage or safety risks, always hire a certified HVAC specialist to repair or replace broken parts.
Furnace repairs cost $50 to $150 per hour for the labor, plus you’ll need to budget for the cost of parts. Small repairs may be billed at a $100 to $200 minimum rather than by the hour.
One of the quickest repairs is to replace a dirty filter, which only takes a few minutes and is easy to DIY. Some of the more difficult, time-consuming parts to repair include the blower motor, the draft inducer motor, coils, and the heat exchanger.
When you hire an HVAC pro in Tampa, you can expect between 40% and 90% of your total furnace repair cost to go toward labor, meaning labor alone costs between $300 and $690.
This is much higher than you’d pay in most other cities for two main reasons. First, the cost of living in Tampa is more than 6% higher than the national average, which drives up labor costs. Second, far more homes in Tampa have heat pumps or ductless mini-splits that can provide the minimal heat they need in the very mild winters without the need for a standalone system. So, you may run into difficulty finding an HVAC tech who specializes in furnace repair, and the low supply of experts contributes to higher labor costs.
In some cases, you may need a permit. For HVAC permits, the City of Tampa charges a flat rate of $124. You can ask your HVAC tech if you’ll need a permit for your specific repair and then budget accordingly.
Furnace repairs won’t increase home value, and while they can prevent property value from declining, even that is unlikely in a place like Tampa, where winters are very mild and homeowners sometimes don’t call on heat at all throughout the year.
If your furnace is beyond repair and you decide to replace it, you could see a small return on investment (ROI), although the lack of need for heating, once again, will reduce the value increase. Your best option for maximizing ROI is to replace your furnace with a heat pump that can replace both your heating and cooling systems with an energy-efficient and sought-after system in Tampa.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
From average costs to expert advice, get all the answers you need to get your job done.
The EPA banned R-22 refrigerant, but if you still have a system that runs on it, here’s the latest on R-22 refrigerant prices for the remaining reserve.
Factors such as labor and parts impact the final price of repairing a window AC unit. Learn all of the costs associated with window air conditioner repair.
The average boiler installation cost depends on size, system type, and other factors. Keep reading to learn the cost of a new boiler.
Not sure what the difference is between single-stage vs. two-stage HVAC systems? Find out which one is best for your home and needs.
This calculator will help you determine what size furnace you need to keep your home toasty warm this winter.
If your furnace is making loud noises, it could be the first sign something is failing. This guide will go over some of your furnace’s most noisy issues.