Chain-Link Fence Cost in Dallas [2025 Data]

The average cost to install a chain-link fence in Dallas is $2,349, and most residents pay somewhere between $1,193 and $3,537. Your price will depend mostly on the size of your property and how complex the shape of the lot is, but things like metal gauge and fence height will also affect your costs.

Chain-Link Fence Cost Factors 

Some homeowners in Dallas, Texas, pay as little as $530 to install a chain-link fence, but prices can climb as high as $6,262. There are a few key factors you should think about to get an accurate estimate for your project.

Length and Height

Chain-link fence installation costs $7 to $40 per linear foot, which includes materials and labor, with an average price range of $9 to $20 per linear foot. Contractors often issue estimates with a per-linear-foot calculation, and costs go up as the fence size increases.

The height of your fence matters, too. Fence height won’t have much of an impact on labor fees, but opting for a taller fence can drive material costs significantly higher. Here’s what you might pay based on chain-link fence height:

Type of Chain-Link Fence

The most affordable types of chain-link fences (galvanized and wood-post) start at $5 per linear foot. On the other hand, the most expensive type (wrought iron) can reach prices up to $98 per linear foot.

Here’s how the type of chain link fence affects the cost in Dallas:

Diamond Size

“Diamond size” refers to how large the opening is between each link. A smaller mesh creates slightly more private outdoor spaces but decreases visibility and requires more materials. The most common residential size is 2” x 2”, which costs $2 to $8 per linear foot. Decreasing the diamond hole to 1” x 1” costs $7 to $15 per linear foot.

Gauge (Thickness)

The thickness of the chain that creates the links, otherwise called its gauge, reflects the project cost as it determines the cost of materials. Basically, the higher the gauge number, the thinner the metal strands, translating to a lower cost of materials.

Thicker strands last longer, provide more security, and are generally more resistant to rust and inclement weather. It may be worthwhile in the long run to upgrade to a thicker metal mesh in Dallas, as thinner fences are more likely to get damaged from blown debris during the occasional tornado or thunderstorm.

Posts

Your fence needs posts to help it remain sturdy, and they can also provide a bit of unique aesthetic flair. Putting in some posts costs an average of $3 per linear foot, or $30 per post. Most contractors wrap this cost into the overall estimate, as you can’t have a fence without something to hold it together.

Land Clearing and Prep

You may need to budget separately for land preparation, which can include leveling slopes for easier installation or clearing brush, trees, or debris. Dallas is a relatively flat city, so most homeowners won’t need to worry about land leveling.

You should scan the perimeter of your property, though, to see if there’s vegetation or debris you need your pro to remove beforehand. Properties in Dallas are a little smaller than the national average, so if you do need clearing, you’re likely to pay a bit less than residents in most other cities.

• Land clearing cost: $250 to $2,750

• Land leveling cost: $850 to $2,950

Add-Ons

You may want to consider add-on products and services to get the most value out of your chain-link fence. You can use the table below to get an idea of what extra services will cost. In Dallas, where property sizes are below-average and population density is above-average, popular options include privacy features, like slats or screens. You may also want to consider a protective coating to avoid rust, as rainfall is above average in the area.

Fence Installation Pro Costs

An average of 50% of your total chain-link fence installation costs will go toward labor, which means hiring a fence company in Dallas will cost you between $700 and $1,950. This includes setting posts and stretching the chain-link fence for a clean installation. The cost of labor per linear foot is between $7 and $40 in Dallas.

In addition to labor, your pro will charge you for permit fees, which will add a minimum of $100 to your total, although final prices are based on the total cost of your project. Fences that are under 4 feet tall in Dallas don’t require a permit, so you can ignore these fees if you’re installing a short fence.

Does a Chain-Link Fence Increase Home Value?

A chain-link fence can add to your home value a little, but the return on investment (ROI) is normally quite low because this isn’t the most attractive type of fence. You’d see a much higher ROI from installing something like an aluminum fence. Aluminum fences cost more, but they also add more to curb appeal and home value.

You can maximize your ROI by including add-ons, like privacy features, as these are more desirable in densely populated areas like Dallas, especially because property sizes are below average. You can also see a higher return by choosing a thicker fencing material that will stand up better to the occasional extreme weather in the area.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.